1N4148W-V-G document number 81139 rev. 1.1, 17-aug-10 vishay semiconductors www.vishay.com 1 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal fast switching diode features ? silicon epitaxial planar diode ? fast switching diode ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sod-123 weight: approx. 9.4 mg packaging codes/options: 18/10k per 13" reel (8 mm tape), 10k/box 08/3k per 7" reel (8 mm tape), 15k/box parts table absolute maximum ratings t amb = 25 c, unless otherwise specified note: 1) valid provided that electrodes ar e kept at ambient temperature. thermal characteristics t amb = 25 c, unless otherwise specified note: 1) valid provided that electrodes ar e kept at ambient temperature. ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 17431 part ordering code marking remarks 1N4148W-V-G 1N4148W-V-G-18 or 1N4148W-V-G-08 ah tape and reel parameter test condition symbol value unit reverse voltage v r 75 v repetitive peak reverse voltage v rrm 100 v average rectified current half wave rectification with resistive load f 50 hz i f(av) 150 1) ma surge forward current t < 1 s and t j = 25 c i fsm 500 ma power dissipation p tot 350 1) mw parameter test condition symbol value unit thermal resistance junction to ambient air r thja 357 1) k/w junction temperature t j 150 c storage temperature t stg - 65 to + 150 c
www.vishay.com 2 document number 81139 rev. 1.1, 17-aug-10 1N4148W-V-G vishay semiconductors for technical questions within your re gion, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics t amb = 25 c, unless otherwise specified typical characteristics t amb = 25 c, unless otherwise specified parameter test condition symbol min. ty p. max. unit forward voltage i f = 10 ma v f 1000 mv i f = 100 ma v f 1200 mv leakage current v r = 20 v i r 25 na v r = 75 v i r 5a v r = 100 v i r 100 a v r = 20 v, t j = 150 c i r 50 a diode capacitance v f = v r = 0 v c d 4pf voltage rise when switching on (tested with 50 ma pulses) tested with 50 ma pulses, t p = 0.1 s, rise time < 30 ns, f p = (5 to 100) khz v fr 2.5 v reverse recovery time i f = 10 ma, i r = 1 ma, v r = 6 v, r l = 100 t rr 4ns figure 1. forward characteristics figure 2. dynamic forw ard resistance vs. forward current 17437 0 1 2 v f ( v ) i f (ma) 10 -1 10 -2 1 10 10 2 10 3 t j = 100 c t j = 25 c 1743 8 f = 1 khz t j = 25 c i f (ma) r f ( ) 10 10 2 10 3 10 4 10 -2 10 -1 110 2 10 2 5 2 5 2 5 2 5 figure 3. admissible power dissipation vs. ambient temperature figure 4. relative capacitance vs. reverse voltage 0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 t am b - am b ient temperat u re (c) p tot - po w er dissipation (m w ) 20 8 09 17440 v r ( v ) 0.7 0. 8 0.9 1.0 1.1 f = 1 mhz t j = 25 c 2 0 8 6 410 c d ( v r ) c d (0 v )
1N4148W-V-G document number 81139 rev. 1.1, 17-aug-10 vishay semiconductors www.vishay.com 3 for technical questions with in your region, please c ontact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): sod-123 figure 5. leakage current vs. junction temperature 17441 t j (c) i r (na) 10 10 2 10 3 10 4 100 200 2 5 2 5 2 5 2 5 v r = 20 v 1 0 figure 6. admissible repetitive peak forward current vs. pulse duration 17442 t p (s) i frm (a) 100 1 3 5 10 -5 10 -4 10 -3 10 10 -1 10 -2 25 2 5 25 25 25 25 2 4 10 3 5 2 4 1 3 5 2 4 0.1 i i frm t n = t p /t t = 1/f p t t p n = 0 0.1 0.2 0.5 0.1 (0.004) max. 2. 8 5 (0.112) 2.55 (0.100) 3. 8 5 (0.152) 3.55 (0.140) 1.7 (0.067) 1.40 (0.055) mo u nting pad layo u t 2.5 (0.09 8 ) 0. 8 5 (0.033) 0. 8 5 (0.033) 0. 8 5 (0.033) cathode b ar 0.65 (0.026) 0.45 (0.01 8 ) 0.10 (0.004) 1 (0.039) 0.15 (0.006) 1.35 (0.053) 0.2 (0.00 8 ) 0 to 8 0.45 (0.01 8 ) 0.25 (0.010) 0.5 (0.020) ref. re v . 4 - date: 24. sep. 2009 doc u ment no.: s 8 - v -3910.01-001 (4) 17432
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
